4 X 6.5" SPEAKER BAR
Designed to be able to install 4- 6.5" speakers. This is the perfect speaker bar if you have the room and want good and loud music!
There is internal room for a small amplifier, check with us for details.
We designed this model for universal bolting with a total of (6) mounting pads. This unit can be suspended using spacers, or you can fabricate simple mount brackets that will pick-up the (6) mounting points. Roof mounting is also possible using a set of 1,1/4" threaded spacers, we offer this as a complete hardware package.
We also offer this unit for various manufactures Side By Sides along with specific roll cage mounting kits. See "OPTIONS"
This speaker bar features a removable back cover with it, and the housing is re-enforced with integral structure for both added strength and rigidity. The back cover has a foam rubber seal to keep dirt, water, and debris out.
You can order this speaker bar with speaker cut-outs or no cut-outs at all. We offer the most common hole cut-out diameters, 5.5" O.D. If you are not sure the exact diameter of the cut-out hole and require one ,(6.5" refers to speaker cone diameter not hole cut-out size) we drill 5.5" which can be used for most all 6.5" speakers.
DIMENSIONS
- LENGTH- 42"
- WIDTH- 8.5"
- DEPTH- 3.5" (Widest Points)
SPECIFICATIONS
- RE-ENFORCED MOLDED ABS RAISED GRAIN FINISH
- (6) MOLDED 3/8" MOUNTING PADS
- SPACE FOR (4) 6.5" ROUND SPEAKERS
- PRE-CUT SPEAKER HOLES (5" INDUSTRY STD.)
- STAINLESS STEEL HARDWARE
- 1/4" X 20 THREADED MOUNTING STUDS (6)
- REMOVABLE REAR COVER WITH FOAM/RUBBER SEAL
Note: Maximum speaker depth (inner frame to magnet bottom 3.0") If your speakers have a greater depth contact us and we can supply spacers.
CUSTOM MOUNT KITS AVAILABLE FOR UTV'S "SEE OPTIONS"